For a 250 scooter, there are no manuals yet, BUT the engine is a clone of the Honda CN250 engine, made back in the late 80's and early 90's. There are Honda...
Alex, i'm recalling that you did a total tear down of your scoot, and you did tell me to start at the back and work forward.\\ i need to get to the airbox to...
OK Don, here goes... First remove the curved piece under the taillights. Then remove the piece on the left fender. Then you have access to the airbox cover, so...
alex yes this is the 250cc i'm talking about i looked under that left side piece (the one that has the name decal on it), and there's one screw at the front...
Alex, sorry, i went and took a long look and i was totally wrong.. i can just remove that slim bottom side piece.. the screw i was talking about holds the...
alex do i have to remove the cowling to change out the headlights, or can i pull them out from behind. i reached under the front piece last night and could see...
You have to remove the cowling. Richard donchan <dcsf2001@...> wrote: alex do i have to remove the cowling to change out the headlights, or can i pull...
Actually, you don't have to remove the cowl. But it helps if you know how things are situated under there before you change the bulbs without removing the...
I changed the gear oil yesterday on my Tank Touring 250 and since then it's been slowly dripping gear oil, about 10 drops per hour. I tightened the drain and...
Well, you did use the right weight oil for the 250, but did you lose one of the copper/bronze washers that were on the drain/fill caps? That would explain the...
I have approved alot of new members lately, and would like to welcome you all to the group. Feel free to use the files and links sections, and if you have any ...
I just got a Roketa Bali 250 and I am going to be doing an oil change and gear oil change soon, What are the best oils to use? Any other service tips would be...
Well after trying a variety of oils and gear oil mine runs best on 10/40 full synthetic and the gear oil I belive is 75/90. I also completely drained the...
Castrol Syntec Blend 10/40wt oil, and 75/90wt gear oil (I use Walmart's house brand) are what I recommend for the 250cc Engines. Pure synthetic oils are not...
I am just a bit confused due to the fact I had a syntec blend in the Bali and it ran sluggish. I contacted bnscooters (where I purchased it) and they...
It's your choice. You can listen to a sales guy who wants to sell you a bill of goods, or you can listen to an actual owner who has been a mechanic and...
I've noticed that whenever i lift the radiator cap of my Tank Urban Touring 250, it's always filled to the top, and doesn't seem to go down. I followed...
Back again, with another problem with my Tank Urban Touring 250. What's happening is, if i'm going up a long hill (say 30 mph) and then decellerate for a red...
Just a friendly note to let you know that I monitor both this forum, and the scooterforumonline, so there is no need to post the same question at both...
You have a fuel mixture problem now that you have an exhaust leak. When the engine is cold the choke closes, and decreases the amount of air flow through the...
It sounds to me like a mixture issue. I just fixed a problem I was having. I had to take off the intake manifold, and check it for a split. It had none, but I...
It's supposed to stay full automatically. That's why it has an expansion tank. You won't see movement of the coolant if the radiator is full. The posting of...
Gordo, I fixed the uploading problem, so you can upload Files and Photos here now. ( Sorry folks, I had the settings set to only allow moderators to upload.)...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Chinese_scooter_forum group. File :...
Chinese_scooter_forum...
Nov 25, 2006 5:24 pm
188
Hello to all. I just started a new scooter TOURING group. The new group should NOT compete with this group in ANY way. It's all about stories and experiences...
