while i think of it www.husqvarna-parts.com now has the correct schrader valves for the remote reservoir Ohlins as fitted to the MX6/qualifier and on the early...
For the MX tracks that we race on here (i.e. around Sydney) I find that the MX2 is a bit of a handful. I'm just an average Joe rider I suppose, but with it's...
I haven't done it myself but that might just be the tool for you, especially of you tend to lug it or let the motor pull instead of reviing hard. Let us know...
Did you check your clutch bolts, I've had one loosen before and work out and hit cover. Also check clutch housing area for broken teeth on clutch basket/crank...
I've messed with flywheel weight before adding weight will slow the rate at which it increases or decreases rpm , up to a point . I welded 2 BIG beads around a...
are the ring/s still good and proper ? one of them didn't catch on a port ,break and fall into the crank cases did it ? coz I can see how that would cause a...
... So far I have had no luck on the above..........its a showstopper. Is anyone parting out an MX-6 with aluminium swingarm that has decent serviceable...
Did you try Al Roberts? Brian ... From: ruairispencer <spencerruairi@...> Subject: [Can-AmMotorcycles] Re: Aluminium Swingarm Sleeves / Bushes etc To:...
Hi Ruari! It's Remi that Comeca,have you a part number of your parts do you need? ... From: ruairispencer To: Can-AmMotorcycles@yahoogroups.com Sent:...
No I dont Remi. I only have the part numbers for the steel swingarm The only part number I have is 749 021 000 but I think that is for the aluminium swingarm...
Ruari, If is the same part, i will check in my lot of used swing arm if i can find this in good shape! Have you have a interior diameter of your swing arm ( or...
That statement surprises me. I have never had a problem. Bama Gary In a message dated 3/4/2009 7:30:58 A.M. Central Standard Time, spencerruairi@......
Gary, I have yet to get in touch with Al. I've tried 4-5 times and never get anyone, so I stopped trying and go to Keith or tony Murphy but I still recommend...
Brian. Al is on aol. I have him on my buddy list. He only goes on line once per day, including weekends. I know because I see him logged on. He reads...
I am having trouble setting up what I believe to be a bog standard Can-Am aluminium swingarm to a MX-6 125cc that I am rebuilding. The problem I have is as...
If you knuckle down hard enough I reckon any of em would bind . Since the Al swinger went in without binding it should be a proper fit . use an equal amount of...
I don't have any big sprockets mine are all 42 or 40 . also I have no front sprockets other than what I'm using . I did find an mx valve which I'll sell for 20...
Do you know of a good source for a 52 tooth rear sprocket? Britt To: Can-AmMotorcycles@yahoogroups.com From: type281@... Date: Mon, 9 Mar 2009 00:36:56...
Hi Steve! For a 79 MX5, it's 15 front and 47 rear Remi Comeca inc ... From: Steve Meyer To: Can-AmMotorcycles@yahoogroups.com Sent: Tuesday, March 10, 2009...
sorry guys, i have been really busy and haven't posted or replied that much...but i need all of your help..74-75 tnt 250 engine...i need EVERYTHING to put a...
When I replaced the shift shaft and the kick start knuckle on my Qualifier, I got everything I needed from Keith Taylor. Bama Gary In a message dated...
... Do you want new or used parts? Most of that stuff doesn't really wear so used parts are probably in pretty good condition. I imagine the kickstarter shaft...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
