I have two orange bikes. They work okay but when I filed the gaps in the teeth down, they work great. Bama Gary In a message dated 10/13/2009 2:23:25 P.M....
I bought new plugs from Al Roberts. Bama Gary In a message dated 10/13/2009 2:34:31 P.M. Central Daylight Time, stuka529@... writes: DOES ANYONE HAVE A SET...
When I had a TnT in 1973 I braze welded pieces of a triangular file crosswise on the footpegs. I now have a 1975 TnT but haven't yet modified the pegs....
Howdy! Well I new it would happen! I picked up a 86 ASE250 for a winter project and then a CZ 380 that I have been wanting came along, so I picked it up...
I have been riding Can-Am's for about 6 years. Currently I have a 250 MX-2 and a MX-3. Both have the oil injection systems on them. My question is, I have...
Why remove the oil pump? It uses less than 1/5th of 1 horsepower, which is negligible. The pump is a variable style pump, which means that it increases the oil...
Steve, Thanks for the quote, I did a little research and found the author was Calvin Coolidge. Everyone has challenges in their lives, and a little...
The way it was written on the poster was slightly different than Coolidges quote, and wasn't attributed to him on it that I remember, however the sentiment is...
oddcycler has a good point. for the bikes that came with injection, I'd recommend leaving them injected. I've heard of some guys who switched to Amzoil (back...
From a purely theoretical standpoint pre-mix can never lubricate as well as the pressure feed oiling system Can-Am used. Its exactly the same Mikuni pump that...
Look up in the subject for it. George Nebeling 95B Web Developer To: Can-AmMotorcycles@yahoogroups.com From: oddcycler@... Date: Thu, 29 Oct 2009 14:31:02...
I ride mainly on dirt fireroads with occasional MX like sections. I'd like to get a little more travel and can't afford Works. What is out there? thanks...
One thing you can be sure of, nothing is cheap. I have Works on my 175 Qualifier and I love them. Bama Gary In a message dated 10/29/2009 5:32:40 P.M....
If anyone knows, oddcycler will know. How about it Larry? Bama Gary In a message dated 10/29/2009 5:21:33 P.M. Central Daylight Time, larryakoch@......
I remember in the mid 90s when ATK in Utah bought a large lot of left over late model 250/6 speed crate engines from Rotax Austria for a rumored $50 each....
I have a MX6 400 pipe that is in decent shape. I can send you some pictures if you are interested. Will trade for fenders for my Kramer! Thanks, Todd...
Better yet you got a pic of the Kramer? Keith ... From: John J. Dawson <mrsupersport@...> Subject: Re: [Can-AmMotorcycles] Re: 1980 MX-6 400 Parts To:...
I AM IN NEED OF SOME ADVICE...I HAVE RECENTLY STARTED TO PUT MY MOTOR BACK TOGETHER. I HAVE RUN INTO A CLUTCH PROBLEM. I HAVE PUT THE CASES BACK TOGETHER, PUT...
I adjust my 175 Qualifier by the manual. I've always been told that a hard-pull clutch on a Can Am is normal. Bama Gary In a message dated 11/6/2009 12:06:33...
I cleaned and lubed my clutch perch, lubed the cable, and polished the ramps on the inside of the clutch cover, and that seemed to work well on my bike Britt ...
I had clutch problems with one of the bikes I built because I was also told not to follow the manual. I finally did adjust everything as the manual states and...