Pete Many thanks for your help, I'll try this after the holiday. Cheers Chris ... 73740021A. Your Ducati dealer should be able to cross reference this to the...
Does anyone have or know what Haynes Manual applies to the 99 Cagiva? I have a manual for Ducati 91 - 94, but is the engine different? Also my Instrument gauge...
Chris, I am interested in the cases as well. Also, if the top case is required for another bike and doesn't match, I have a black Givi e450 case on my GC now...
Alan, If you take apart the front fairing, the gauges do come apart. The top lens is held on with plastic snap tabs and can be removed with a small flat...
I am at a point in my life where I don't really feel the need to make a lot of noise. However, my GC with the stock mufflers is a little too quiet and I would...
No need to do anything, after about 10-12K Km the stock muflers inner glass fiber material, gets compressed and the sound opens quite a bit. I don't like the...
Hi The little inner end cap pipe goes all the way back to the front of the muffler and doesnt come out. What I have done is drill a number of holes beside the...
People want a louder exhaust note? What?! Isn't that near deafening intake noise from between the double gas tanks enough? LOL. Which, btw: I've got some...
Hello all. I'm the new owner (3 days) of a 99 Gran Canyon in Silver/Blue. I wonder if I could seek members advice. The top & sides of my tank are silver in...
Thanks to all who offered input on modifying the stock mufflers. I am tempted to drill some holes in the baffle plate. Seems like a good idea because I could...
Hello, Can anyone please take a close up picture of the front wheel on the left side where it meets the lower fork at the axle? I just got new tires put on,...
Today, I drilled 8 each, 5/16" holes in each muffler, then went for a ride. If I were to do it over again, I would drill 4 holes, then see how it went, then 6...
Wayne, Thanks so much for the pictures. Those pictures show just what I have (axle meets wheel bearing), so no missing parts I guess. It just seemed to me that...
Matt, I had the same concern with my last tire change but there is no spacer on the left side. The wheel is held in position by the axle only. No photos avail....
I have a 99 Cagiva Gran Canyon and want to get a after market manual for it. What Ducati manual corresponds with the 99 FI motor? I already have the Haynes...
No you are not missing a part. The problem is that the design of the axle/forks/wheel assembly is not quite right. If you just put it together, the brake ...
I have a 99 Cagiva Gran Canyon and want to get a after market manual for it. What Ducati manual corresponds with the 99 FI motor? I already have the Haynes...
I have a 99 Cagiva Gran Canyon and want to get a after market manual for it. What Ducati manual corresponds with the 99 FI motor? I already have the Haynes...
Don't know about the aftermarket manual, but I am nearly certain that the FI used on the Cagiva is unique and not shared by Ducati. - Tom ... for it. ... ...
Hi Alan, With the Haynes manual, the internet-available Work Shop Manual for the GC and the manual from Desmotimes, (www.desmotimes.com) you will be able to do...
Does anyone have the info for the rear brake pads. I haven't been able to find any locally. I thought they may be used on another bike, but according to EBC,...
Here is the contact info for Galfer Brakes. They had both front and rear in stock when I ordered them. 800 685 6633 Cagiva FD 108 G1054; FD 117 G 1054 ... ...
Matt, Funny you should bring this up. I did two tire changes (BMW rear and Cagiva front) simultaneously. I had changed the G/C many times before but when I...
Steve, Finally added the pictures to the group photos. Here's the link: http://autos.ph.groups.yahoo.com/group/Cagiva_Gran_Canyon2/photos/browse/544c Steve...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
