An excellent suggestion. I zip tie the white connector on the solenoid to one of the adjoining wires to keep it from falling out. ... didn't ... response ... ...
When replacing the swingarm pad the other day (thanks for the quick shipping Letko!) I realized my chain was REALLY loose. This was upon returning from a 1200...
... That reminds me... walk into any NAPA store and they have a filter wrench that slips over the end and works with a 3/8" drive for about $12. It fits three...
Do the chain & sprockets need to be replaced together? Or can I do a new chain and be OK? The bulk of my experience with chains is with bicycles, and with...
The one I ended up with needed a little grinding around the lip to get it to go completely on the filter and clear the hole in the case where the filter goes....
Bill; This is a classic presentation of a chain in need of replacement. It illustrates why you should always check the chain in several places, not just one. ...
I recently replaced both sprockets and the chain. In 55,000km, this was my 3rd chain and 2nd set of sprockets...the OEM chain had identical tight links as...
Chain adjustment has a sweet spot. Too loose and you cause excessive driveline lash, which contributes to stretching the chain in places. Too tight and you put...
I installed my Laminar Lip the other day. I'm not that impressed with the fit. The profile of the lip doesn't match the upper windscreen. Because the top of...
I have three lips on various bikes now. You must put the fasteners where they will be flat on the shield and lip. I made the mistake of putting the fastener on...
When installing using the supplied top bolt the lip is so far away from the windshield that I can't even use the hook/loop fasteners. While the kit came with a...
Just got off the phone with Leo and Josh at Laminar. They want me to send the lip back. Josh said the angle on the top part of the lip is too steep, causing...
Ain't it great to be an unpaid beta tester? :> I had the same isssue with Gustafson who sold me a windscreen with no holes pre-drilled in it so that it could...
I don't mind helping out with niche products. It isn't like Laminar is going to get rich making lips for the GC. But paying my return postage would have been...
Do you have the tall shield? ... I don't mind helping out with niche products. It isn't like Laminar is going to get rich making lips for the GC. But paying my...
I drove mine down from bay area, took it over on lunch and waited several hours while they fitted it, then went back and let em take pics. If you have such a...
Hi Try to upright the bike, there is a "tilt"sensor somewhere on the bike, I had the same problem a few days ago. Otherwise it may be the sidestand switch or...
Hello, I'm preparing to perform my second valve check/adjustment, and am considering Brickwood collets for both the GC and my '97 900SS. I just received a ...
Just keep in mind one thing. THe higher the milage, the less likely it'll be to require adjustment. I just did the 18k mile adjust and eveything was within...
I have a set of the MBP or Brickwood collets that I personally installed on my GC a few years ago. From what I understand, the MBP collets come/came in two...
I have tried to order this book from the US but they are requesting $56 delivery, can anybody give me the ISBN number so I can try to find a UK supplier. ...
Yes, I love it. Bearing in mind that no GPS is perfect, I recommend the I-Way over other models I have tried, including most Garmin units. I toured with it 10K...
Here's my Wilbers Shock Review: Product Review – Wilbers Rear Shock Suspension upgrades are one of the few cost effective modifications you can perform to a...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
