... may ... Some of the high end chain breakers will work as is but it still puts a lot of stress on them. I always grind the pin flush with the side plate...
... That it is. Don't forget that there's more to chain lube than just greasing up the joints, it also provides a cushion between the chain and sprockets to ...
I like the Honda lube the best. It costs a bit more, but I could tell when it was time to re-lube visually. Right now, I am using a can of JB Chain Lube (No...
... thanks. It makes more sense now to grind it down and then chain break. Before this experience it really didn't figure for me to have to grind down...
I am living in college station tx and i am looking into getting a nighthawk in two weeks. I've seen this bike sitting at the local honda dealer for about three...
... Watch out for "hidden costs" to push the list price up when you purchase from a dealer, eg administration or dealer fees, add-on warranty plans, etc. Good...
its got a little over 6000 miles on it ... From: Rick Jost <rkj111@...> To: CB250_Nighthawk@yahoogroups.com Sent: Tuesday, April 1, 2008 11:25:11 PM ...
Thanks, i'll watch out for it. ... From: jmori9 <jmori9@...> To: CB250_Nighthawk@yahoogroups.com Sent: Wednesday, April 2, 2008 10:25:35 AM Subject:...
... Well, there is no rag in the intake, fuel flows well from the float bowl drain valve, and the compression is at 120 psi. My manual states that it should be...
... The Honda manual indicates normal compression is 199~213 psi at 500~600 rpm. The service limit is 144 psi, so 120 is not good. Some of my winter project...
Hi guys, I'm looking at this machine and wondering if there are any special things to look for and are these nice bikes? A little on the heavy side, maybe? Are...
Michael, when doing the compression reading was the throttle wide open and choke plate open? You need wide open breathing to get an accurate compression...
I think someone here on the forum is riding one. They're good bikes, just getting kind of old for parts availability. I don't like the stepped seat. Just a...
... Seconded. ... I'm not sure ours do (UK) but they can refer any loud vehicle to be re retested. The bloke across the road (nice chap normally) has fitted...
... Chopping off the stock mufflers or running straight pipes is just not a good idea. It's obnoxiously loud, can damage your ears over time, and makes your...
... Our daughter used to run a little Yamaha TY80 (and a PW50 before that) over the back of where we live on a bit of 'unused' rough ground. It was actually...
There are plenty of MP3s on the Internet of Harleys with straight pipes. Just copy them to your iPod, listen while you ride, and your bike can be as loud as...
... bad ... Your ... public ... of ... back ... power ... question. and if i wanted to put a freakin 9 billion watt sterio on my bike, then guess what, im...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
