I've got a (now) stock 2000 Cyclone that I'm interested in replacing the air-box on. I was running a ForceWinder w/K&N, but have since removed it, along with...
getting the same flow as the stock box is going to be a bit of trouble. in theory, any intake that used the stock filter and used the same diameter intake tube...
Shock waves in the intake stream, huh? Wow, that's new information.. I've never heard that one before. I've heard that it's supposed to lessen the noise...
Hi, The breather can run into the airbox post filter element or as I have it to a breather filter or remain to a catch bottle. There is a pretty good pick on...
In a message dated 2/6/2004 9:22:57 PM Pacific Standard Time, bluetrianglepig@... writes: I've got a (now) stock 2000 Cyclone that I'm interested in...
Yes I agree. The Buell Cyclone is such an in your face bike anyway, to take of the airbox and pretend its just another bike is a no no. Also the airbox...
I remember a loooong time ago hearing about someone who'd had a mirror-image airbox fabricated, to hang on the other side of the bike. I'd be worried about...
In a message dated 2/8/2004 2:02:18 AM Pacific Standard Time, edrigw@... writes: Yes I agree. The Buell Cyclone is such an in your face bike anyway,...
The airbox is also a great crowd puller, conversation opener for passers by. I shall keep mine as long as I keep the Cyclone... Edrig BuellV@... wrote: ...
I have an almost brand new 98' (1800 miles) that's bone stock and want to replace the exhaust. I want something that increases the performance but still makes...
Hi Chris, I have a 1998 S3 also. My bike has the carbon fiber Borla pipe with the racing ignition and stock carb. I have a friend that has a 2000 X1 with the...
In a message dated 2/18/2004 8:29:54 AM Pacific Standard Time, cvar_ed@... writes: are you in the bay area? I have a new vance and hines at the house,...
I have an internal disc Supertrap that will fit your stock header. It came off a 2000 S bike. Adjustable for performance and good looking. If you are ...
Cowen, John J
John_Cowen@...
Feb 18, 2004 4:52 pm
671
Thanks Edward. Is your friend's vance & hines carbon fiber or aluminum? Edward Smith <cvar_ed@...> wrote:Hi Chris, I have a 1998 S3 also. My bike has...
I run a White Bros. E-Series on my S3. Adjustable so you can make it as loud as you like. Similar to SuperTrap but much better construction. Jim ... From:...
He has the Aluminum V&H. chris tucci <christophertucci@...> wrote:Thanks Edward. Is your friend's vance & hines carbon fiber or aluminum? Edward Smith...
Concord Ca. My system is in GOOD shape. Sounds like a Harley at idle and under power even with all the dics in. Adjustable for sound and power. Important ...
Cowen, John J
John_Cowen@...
Feb 18, 2004 5:36 pm
676
Define GOOD for me: appearance, how long ago you bought it and how long you used it, etc. Do you have the muffler, all hardware, and instruction sheet? How...
i got it from a bueller in san pablo and ran it 500 miles. i ended up going back to stock. he had about 5k on it. it looks great and does not need repacking....
Cowen, John J
John_Cowen@...
Feb 18, 2004 6:36 pm
678
I want to install this on my new 98 s3. After installation, is it necessary to use a DynoJet jet-kit to compensate and recalibrate the carburetor? Thanks....
It's a good idea to richen the mixture if you open up the intake. otherwise the increased air can lean out your mixture too much, increasing the danger of...
Hello Buellers, Just joined. Good to be here, thank you. Intro...Been motorcycling since '72. My finest and best ride is a Buell M2. Slip-on, mikuni42, 1"...
Welcome rocket! There is a pretty good presence for Buells here in Austin! There is a group that meets on Thursday nights and occasionally on rides on the...
Oh yeah, there is another yahoo group for Austin Buell folks (actually too) Hellbuellies and autsinbuell are the group names. Join them and meet the rest of...
Hey Bryon, Thanks for the heads up about the other Buell yahoo grps. I found hellbuellies but austinbuell comes up negative on yahoo grp search. Speller I'm...
Buelltechies, This is a tech forum so I better share some tech stuff. Let's see, my much desired Vance and Hines (M2) slip-on fragged it's baffle within 1k...
I second the White Bros. system. Only problem I have had is that the weld on the front pipe kept breaking. I finally used some fender washers with a rubber...
