I was trying to read a stock early Carerra chip 1267355041 and have run into some problems with the checksum. Is this one of the early 2716 chips?? Anybody...
Hello I'm looking for informations about the communication protocols of motronic MP3.x or mp5.x . (peugeot, citroen) I'm almost sure this is not KWP2000. My...
How exactly is the load axis on the part-throttle map defined? I assume a stack method is being used as in the RPM axis. From what I gather it is based on the...
Check on my web page. http://apavlov.club.fr/motronic/map8_format.html There is no comparison with max AFM value, it's just an absolute value that represents...
Alexis, In my example earlier, I used the method outlined in your link (thanks). What I'm trying to figure out is how the Part Throttle map in the Motronic...
This is what I'm saying: I don't think there is any % in the map. It's just a sequence of values each corresponding to an abs load value. Motronic is a 8bit...
Hmm, I agree that the DME isn't going to do any useless calculations for us. I also agree that the DME is using volume flow, at least to start. Then it...
... To start an engine does not need lots of information, it's a very approximative process because huge part of the injected fuel is lost during start-up. At...
... Ok i disassembled the code. Thanks for the tip. Very interesting but i suppose i have to know some micro-controller programming to understand and do...
... The Part-Throttle MAP is 3D: load vs rpm vs value. So in order to change these values properly, I need to know rpm and load in order to adjust the correct...
FR wilk has a new website only944.com also in the schematic section there is a schematic for the ML3.1 box. The schematic looks very well done. Mike D....
FR wilk has a new website only944.com also in the schematic section there is a schematic for the ML3.1 box. The schematic looks very well done. Mike D....
Hello there I would like to ask if anyone has any stock binaries from the Fiat Punto GT3 1998-1999 models which have the ECU bosch 0 261 204 159 version. I saw...
... Ok i got the file, thanks. Comparing these two, they look quite similar, about 13 differences along the two files, most of them look like they changed some...
both links talk about Fiat Marea 2.0 20v Turbo (same Coupe´s engine and ECU). Its in portuguese. lots of info ! Directions on how to make a scanner, and...
... Hi, Thanks but I already know those links and I already have a similar "scanner". The only thing I don't have yet is a recording program. Anyway, those...
I would like a reality check on this one: For the ML 3.1 boxes (2732A and 2764 chips), the checksum is the last address string at $ _ _FE and $_ _ FF? I am...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
