The problem with a performance chip is that the boost and ignition are controlled by one ECU and the injection by another. If you want a little more power you...
I just put in new trunk struts. They cost 30euros for the pair from the dealer and were easy to install with a 10mm wrench. It's a joy to have it working...
Charles, There should be a trunk light, it looks just like the little round interior lights. Only problem is, it only works when the lights are on, and the...
Yeah, I remember that insane design. Procedure to use trunk: - open driverside door - put key in on position - turn position lights on - push electric trunk...
Charles, so, if I understand this correctly. There is no danger of running lean if the extra boost is still within the map sensor range? Could one boost beyond...
I just had a replacement cat welded in. Took it to a reputable muffler shop, they welded in a high flow cat no worries. Somebody had cleared out the pre cat's...
... This brings a topic to mind. For those of you out there that have "removed" or "cleared out" the pre cat's, what method did you use to accomplish this? ...
If the superchip comes with a chip for each ECU and a new map sensor and instructions on how to adjust the wastegates for higher boost then it might work. I...
What's the offset for stock 1984 BiTurbo rims? And does anyone know the wheel hub size for 1984 BiTurbo? There is a place that makes custom spacers and rings...
Forget the Superchips. I put the Auquamist water/methanol injection system in my '89 spyder as well as a 'hybrid' boost controller. With the extra protection...
http://unifit- daten.de/baseportal/2003/katalysatoren/universal_kats_metall_200 Modell MT235 sends also to US : Cost is 217 EUR without tax and shipping ... ...
It's actually a group level setting; and can be enabled or disabled by admins. Of course, considering the proliferation of malicious attachments, I don't know...
The Superchip "kit" IIRC comes with one chip for the injection computer, and a bleeder valve to modify the waste gate output. Like the MIE "euro" y-pipe, it...
Please check out my BiTurbo for sale in the Los Angeles area. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll? ViewItem&item=2488984926 Thanks, Dave...
Hi Mike, A few questions: How long does the water/methanol tank last? Did you adjust the wastegates? What is a 'hybrid' boost controller? 0-60 in how many...
Time for a green leather update - SUCCESS! I used a set of products from Color-Plus. After thoroughly cleaning the leather and then applying several coats of...
Although now I no longer have green leather spots, I have developed an electrical gremlin. While driving occasionally the radio would shut off and then turn ...
The I.D. of the euro y-pipe is less than that of the stock pipe, and it's not mandrel bent, so you loose even more flow. Plus, any emission inspector will...
Inspectors? What inspectors? I haven't had any problems but then all of the restrictions have been eliminated. I sure do like the less bulky nature of it when...
on my 425, one side was already clear. i assume it naturally broke up and blew out into the main cat. the other side was somewhat intact, so i used a plumbers...
Robert; Thanks for the tip re fusebox and possible loose grounding somewhere. I guess I know what I will be doing this weekend. The recoloring process works on...
Konrad; Thanks for your help. I will order a new fusebox and in the meantime check for loose ground connections. Even if it is a loose ground likely the...
an apparently common problem area (i've had it in two of three biturbos, so far) is the accessory power relay in the fuse box. this is one of the two relays...
