I have a Bantam T3-C serial no 14713 in good condition for sale. Located in PA north of Phila. Includes tarp bows and original tarp. [Non-text portions of...
Rob, I'm looking for the best offer. I've seen them for sale between $800 and $900. Tom Aiken tomaiken@... _____ From: BantamTrailer@yahoogroups.com...
I want to rebuild the hubs, replace the bearings and such... They rotate fine but wanna clean it up and make it new. What part numbers do I need and can I get...
... Are these the right numbers for the MBT? This info came from http://vegasauto.net/m416/m416faq.html Wheel Bearings (4 per trailer): Federal Mogul Set A-35,...
Hey guys, I am in the middle of putting together my 1946 ser 12956 T3-C. What size nut is holding on the hubs. Its a huge one and I don't have any sockets in...
I never thought of a spindle nut socket. I can snag one at any good parts place, guess it never dawned on me that its kind of like a full float axle. Thanks! ...
Are these the same parts on the T3-C? ... From: paulyburke <paulyburke@...> To: BantamTrailer@yahoogroups.com Sent: Fri, 11 Apr 2008 6:58 pm Subject:...
does anyone have a part number to change over to 12volt bulbs.Also looking for the matching forward harness.If anybody has any tips or could help me out in...
I tried to get these parts at Napa. They don't have these numbers in there system.. 2 - Outer wheel bearing washer, Spicer 17015 2 - Outer wheel bearing nut,...
If you don't find any, email me again in 3 months. I have an M100 that was rolled at speed and is pretty bent up. I'm going to cut the stock suspension/axle...
Yeah that's a little out of my range. Rich In a message dated 4/14/2008 5:55:31 P.M. Eastern Standard Time, paulyburke@... writes: New suspension..New...
I'm sending you some better photos now, and you are right, I don't have shocks on my m100. It was missing them when I bought it, and as I keep meaning to hack...
I have two bantam trailers one has A rectangle data plate with cut corners. this trailer has A strap type mount around the frame on each side of the frame rail...
I think that this question might be OT for this group, but I need some info on what wheels fit the M416 jeep trailer. I recently picked up a couple of rims...
Try using 205/75R/16 tires that is the cross for my Willys Wagon. they are 5" wide rims Or you can go with the NDCC type. Hope this helps. Hal _____ From:...
The 7.00x16 is the tire size that wheel is designed for. The rim is 16x5.0. The tire department manager is correct. Any commercial operation will not except...
Mike, Pictures would help. The two styles of rect data plates I've seen are 1. early T3-C (unsure of exact year/sn's) the corners were assymetrical. 2. later...
... You really need a trailer rated tire for this application, or you won't get a tire shop to mount them - and forget Costco. They are very gun-shy, because...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
