Hi all, still battling with the pesky D7 trying to cure a problem.What I need to know is how do I temporarily wire it up so as to bypass the loom and ignition...
Just finishing a total rebuild of my bike and fitted a new fangled rectfier (about 1 1/4" square 4pins) everythings gone great,well maybe reaming the new...
... Hi Mike, I will have to start pricing up a new alternater i can get a rectifier from e-bay for about £5 do these new ones have to be put somewhere cool?...
... The rectifier does not get too hot as they are rated at 35amp but its best to connect it to some metal part of the bike securely. sorry about the cockup re...
... hope this makes sense copied from a web page...  Take a multi-Meter and switch it to Ohm x 1 Test between one of the "~" and "+" legs. You should...
If your going to change these parts anyway, then buy a combined regulator rectifier instead. The Bantam suffers from bad regulation and can be greatly improved...
... Thanks Mike yes it does make sense, will try that out in the week. Rang C&D autos today about the availability of a new alternator and was told they dont...
... i was going to say its worth checking if you can get it rewired they often turn up at auto jumbles, but not so often when you need one desperately :( Mike ...
The standard module on the later CB100N was 150w rated... I think this should cover a Bantam. The early ones used seperate rectifiers and regulators and are...
Peter, Any should fit. Gear ratio was changed in '62. Alan To: BSABantam@yahoogroups.com From: peterjshort@... Date: Tue, 7 Jul 2009 09:17:28 +0000 ...
Hoping to put my D14 in for mot soon,it still has the original number plate on the front mudgaurd.Does this have to be removed for mot?Also have a problem with...
Hello Tom The front number plate can be retained on the front mudguard. The headlight should work both with and without the engine running. Hope that helps ...
... On a D14 (but not a bushmen) the headlamp should run off the battery, so it should work without the engine running. However my D14 engined D3 runs without...
Can some kind person tell me 1)if the pegs on the piston face towards the front of the engine, my piston is marked with front but no arrow. 2)Is the kickstart...
The B175 has a larger diameter kickstart shaft than the other models which share the same kickstart. You may have the incorrect case if purchased separate from...
Hi Group, Can somebody help with a colour scheme question ? I am rebuilding a 1963 D7 that has been used as a canvas for an budding abstract artist. The...
Thanks Douglas, So its out to the shops for some gold paint , a fine brush and no booze for a day or two to reduce the shake factor !!!!!! ... From: Douglas...
Hi, I was wondering if someone could give me some input on what is right to finish up a '57 D3 150 silencer? Mine was missing the baffles and "fish tail";so I...
Hi all. I'm posting again in the hope that some kind bod might take a pic of the internals of their early D1 bowden operated headlamp for me. I have a nice,...
The engine section is there in a different file - "B175 Workshop Manual 00-4169 A.pdf". I had to split the manual to make it small enough to upload. Nik...
Thanks Nik. Hadn't been in the files section before. What a wealth of information. Much appreciation for taking the time to compile it. Just the job. Regards....
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
