Dan, If you are looking for engine rebuild parts you are going to have to order from England (seals/bearing/piston/rings/cables). I've got 3 or 4 parts bikes...
Been riding my D14 trials about 5 years now and even with a 4 plate clutch I've always had problems with it slipping , especially after going to a 12 tooth...
Hi Bruce. Have you fitted the primary chain tensioner that RCR Villiers stock? I'd like to know how well it reduces snatch. I'll be having a few mods done by...
Can anyone help Is there a web site with colour codes for bsa bantam bikes i have found out mine is a B175 guards are blue frame is black i think rear wheel...
Hi Mark. Re-colours. TheĀ frame is black. Guards, tank, toolbox side covers can be flamboyant blue, red or the whole bike can be black. Hubs are silver. The...
My 1950 d1 electrical alternator has died. I have been looking at fitting a later alternator to the bike so that I can charge the battery which had to be...
Where could I securely keep tools, spare plugs/bulbs etc on a D10/D14. The cover on the right hand side does have space behind it but not much and no real way...
I used to keep all I needed wrapped in a cloth in the right side compartment. If you wrap the securley the y wont fall out. Anyway you dont relly need much, I...
As I have not been able to find a rear rack as yet for my Bantam D14 (apart from one at £70. Above my budget, as I am looking in the used parts market)has...
Obviously made a mistake. I thought this was a board to help Bantam riders, not one for sarcastic twats!! I am a full time carer, so permanently skint....
maybe a push bike then ________________________________ From: pershore67 <pershore67@...> To: BSABantam@yahoogroups.com Sent: Monday, December 15, 2008...
You can find the small Craven racks at autojumbles without any problems. They may need a bit of bracketry to fit, but work quite well. Andy Lorenz ... From:...
... I would keep an eye on ebay for something you could make fit like http://tinyurl.com/5wz2x6 PS, best to ignore any children that have use of their parents...
Agreed, it is quite easy to make a rack which will enable square type boxes to fit. Good luck Paul ... From: Mike <p5xbx@...> Subject: [BSA Bantam] Re:...
Guys, Im trying to replace the lower front fork bushes on my D7 but just cant get them to stay on. I line up the holes and then try and tap them in with a...
Chris,I found that a couple of dabs of braze or solder on the very ends worked well,just file off the excess. Or you could try loctite bearing fit compound.---...
Use a grease to hold the bushes in place, the fork oil should disolve the grease later. Andy Lorenz ... From: bty61070151 To: BSABantam@yahoogroups.com Sent:...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
