... Its not really a question of silicon or selenium as a full wave bridge rectifier they are both interchangeable providing voltage/current limits are correct...
Hi Dom, welcome to the group, a solid state rectifier will work on a Lucas system as we have done it, you need to put a bridge link across two of the terminals...
Hi Kev, Many thanks for the answer. Hopefully, I'll have a go at setting it up in the next couple of weeks. Regards, Dom. ... a Lucas system as we have done...
Hi Guys, I bought new replacement solid state rectifier - can anyone advise how it connects to a '66 D7? It has 4 x spade terminals, 1 marked +, 1 marked AC...
Hi, Could anyone tell me what size the threads are on the older crankcases. The course thread, not the fine one. I've stripped one and I'm wondering what size...
Hi Chris, two emails, same question. As you purchased the rectifier from us. The positive terminal the spade turned opposite to the other 3 is earth as...
Hi George, Sorry for the delayed reply but just wanted to say many thanks for your useful tips - I will put them into practice! Thanks again, Jez ... to remove...
Hi Kev, Thanks for your help - one of the cable colours on my Bantam is different, i have an orange instead of a green, can this go on either terminal used by...
something fiendish going on with my d1, it seems to be killing ignition coils they last about 500 miles then die, which is getting a tad expensive, now have...
Hello, Does anyone know where I can get the seat rebuilt for my D14/4s? It's the one with the highrise back like the one on a Starfire & it's pretty knackered....
Hi Rex, Kev, Thanks for that, they look Whitworth to the calibrated eye. I found out today that A/F stands for Across Flat, so a 1/2" A/F spanner fits a 1/2"...
Hi Dan, Which one stripped? I believe most on the crankcase are ΒΌ whit! Have a Good journey!, Rex REX CAUNT RACING A Division of RDC International Ltd ...
Hi Guys, correct again, there is only one little one, behind the worm clutch drive that holds the casing on and there is enough meat in there to tap out to 1/4...
How about the one that holds the steel chaincase on? David. ... __________________________________________________________ Sent from Yahoo! Mail. The World's...
hi has anyone got a diagram as to how the the centre tinware goes together and where does the coil fit its my first bantam a 1965 D7 it was in bits when i got...
Save money it doesn't work it just blew a`fuse and all bulbs and equipment failed to light.I followed everything to the strict letter all wires connections are...
Did you change the bulbs to 12 V ? Andy Lorenz ... From: duellin_pitbull To: BSABantam@yahoogroups.com Sent: Sunday, March 09, 2008 8:14 PM Subject: [BSA...
Yup completey bought zener battery all the rest new wires connectors all the whole cabudle.; Hows u mate havent heard from u in a while still got the sidecar...
How 'd u know well in the last hour i have been up a tree to retrieve my bike cover wonder what my neighbours thought a 6ft hairy eejit climbin a tree in bike...
Andy the d1 has just been thrown on her side no damage bloody wind now wind howlin and rain lashin down just hopin there will be bikes in the morning N Andy...
The single wire to the zenor diode, tape over the connection to it doesn't spark against frame earth (disconnect it from the zenor as well !). The Lights will...
Howya doin mate Listen bike didnt float away though i was out at 4am propin her up after she was thrown over who says bantams cant fly.Needless to say soaked...
