Vince; Grille 57s are usually the third Saturday of each month. I haven't been to hardly any cruises this year, just haven't been up for it. Ran into another...
Ground the brown (I believe) wire on the starter relay. If I remember right, there is a yellow and a brown wire for the coil of the starter relay. The yellow...
Disconnect the wire that goes into the relay from the trans, then make a new wire to ground that relay terminal to the body. Then don't try to start the car...
If you just disconnect it, the car won't start. _____ From: 66_67_dodge_chargers@yahoogroups.com [mailto:66_67_dodge_chargers@yahoogroups.com] On Behalf Of...
There is an excellent fix for Hedman headers, it's called a dumpster. That's where mine went - with the junk. _____ From: 66_67_dodge_chargers@yahoogroups.com ...
Thsnks for information. Ken in Nashville ... From: Charles Petry <wvmopar@...> To: 66_67_dodge_chargers@yahoogroups.com Sent: Tue, 31 Jul 2007 5:38 am ...
Yep, just disconnect the wire that goes to the neutral safety switch and ground it to the body. It will start in any gear now, so make sure you have your foot...
If you disable the neutral safety switch, the car will no longer start from the ignition switch Why do you ask? My car would not start from the ignition switch...
Come on guys.....you are asking for trouble disconnecting that switch. I nearly got run over at the drags by a guy that was parked behind me in the staging...
Mopar makes a six pack for a 383 It will run fine provided the carbs aren't worn out Even better with a decent cam It will also fit under the hood of our...
A "Stock" six pack setup works fine on a 383. The first thing to remember is the CFM rating on a 2 barrel is different than a 4 barrel, so even though the 3 -...
ALright all you worry warts...thanks for the dumbass remarks and well all the rest. Thankfully, I didn't have to disarm that switch and realized I didn't ...
Tonight marks the 1 year anniversary of chopping up my 1966 Dodge Coronet 2 door to bring to life my 1966 Dodge Charger. I bought the shell of a car a year...
yep - ground the brown ... From: Spelic, Robert To: 66_67_dodge_chargers@yahoogroups.com Sent: Wednesday, August 01, 2007 1:40 PM Subject: RE: -> how do you...
danderous but ground the N/S switch ... From: FyndersKeepers@... To: 66_67_dodge_chargers@yahoogroups.com Sent: Wednesday, August 01, 2007 1:16 PM Subject:...
For the record - any safety comment is NOT a dumba** remark. Ya never know the level of expertise when questions are asked. I've seen WAY WAY too may dumba**...
Its tight but yes if you can tilt the engine up enough John _____ From: 66_67_dodge_chargers@yahoogroups.com [mailto:66_67_dodge_chargers@yahoogroups.com] On...
You'll also have to most likely wiggle it around some to get them past the torsion bars, you can actually sit the headers on the chassis and drop the engine in...
Sure - just take 'em off before you install the engine. Seriously, I had the headers hanging on my 440 while I slipped it in. The important thing is they...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
