Hey everybody, Happy Friday! I have an acquaintance that has a 1966 Plymouth Sport Fury VIP for sale. It is a restoration car for sure, but is pretty complete....
Just got my power disk brake set-up from Master Brake. Anybody out there used their system? I'm a little confused with plumbing the proportioning valve and how...
Billy, I have the MP setup (front disc only) and I did not use a proportioning valve and everything works great. Stops straight, no nose dive etc. Fandango...
Jeff, On some of the previous posts on disk brake set-ups, some say use one, some say don't. Billy ************************************** See what's free at...
Jeff, I assume you didn't try to use the metal plate that bolted between the firewall and the old booster. Billy ************************************** See...
I put disc brakes on all my cars. The proportion valve is for the rear brakes. It goes on the master cylinder in the rear brake output. Now if you have a brass...
This is a picture of the booster and valve I got from MP Brakes. Problem I have is one line (green tipped one) is too long. I would think it would be correct...
The brass valve that comes with the MP kits is a distribution valve. MP intends for you to hang that valve under the master cylinder. There is likely a bracket...
Dave, I think something is wrong with either the spindles are not machined down enough or the wheel bearings are the wrong size. The inner bearing will not...
Can't help you there. I didn't use their spindles. I suggest calling them and verifying you've got all the right parts. Maybe they sent the wrong bearings by...
I have a question about that setup Jeff. Do you have a block in place for the brake warning light, or are the lines running directly from the master to the...
Ken, I may have misunderstood the question. I have the MP proportioning valve that mounts under the master cylinder. I did not use an adjustable valve in-line....
Jeff, I see you have the same set-up as the one I bought from MP. I noticed you didn't use the original plate that went between the firewall and the booster. ...
Ahh, I missed that part....I'm in the midst of gathering parts, using the stock parts method. I got the prop valve off the car that I got my spindles from. I...
CUTE!!! LOL Thanks Jon _____ From: 66_67_dodge_chargers@yahoogroups.com [mailto:66_67_dodge_chargers@yahoogroups.com] On Behalf Of Jon Rappuhn Sent: Sunday,...
Jeff, Is that a MP booster on your car? Did the push rod coming through the fire wall hook up without any problem? My old Midland booster's push rod is about...
I have a few sets of 73 to 76 A-body spindles and the complete disc brake conversion kits using all stock parts available. Contact me at rspelic@... if...
Billy, mine looks like this, only the support bracket has 2 sides(the rubber boot shown is between these 2 brackets). The rod connects directly to my pedal...
Hey Guys. You think your fuel prices are going through the top.What about us down under in Australia we pay a $128.9 to $143.9 for 1 litre = a u.s Quart which...
Jeff, Mine is identical except not using the bracket you have. I got answers from MP this morning. The wheel bearings wouldn't slide onto the spindle. They...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
