Don; That sounds even better, and wastes the time of 5 guys, instead of just one. I think you're onto something... Paul Q ... From: Don R. Dodson To:...
We would like to remind you of this upcoming event. ChargerChat Date: Sunday, February 1, 2004 Time: 9:00PM - 12:00AM EST (GMT-05:00) Eastern Standard Time ...
66_67_dodge_chargers@...
Feb 1, 2004 2:02 pm
37746
In the Mopar muscle magazine www.moparmusclemagazine.com there is an article on a new K-Frame for street use. It's a bolt on K-frame with front rack and pinion...
I went to web site and could not find the article. For those who would be interested, I can scan the article and send it in JPEG format. The file is 9 megs for...
http://www.magnumforceracing.com/store4/magnumforce_kmember.htm Take a look. The last posting made me rethink my web search, and I found this. Ken ... Do you...
Ken, I assume you are talking about the paint on the back of bezel gauge face. [where the oil/temp, fuel alt. read out is ] From what I can see it is a silver...
To some of those in our group that have thought about the magnumforce kit , I have talked to 3 or 4 people that have purchased that kit and have had problems...
I thought this looked a bit too make shift. I didn't think much of no torsion bars either. I like my torsion bars. Ken Buddy Dickerson <buds66_67@...>...
I need help with what the gasket(s)stack up is for the rear axle. Is there a gasket between the brake plate and the axle housing and also a gasket between the ...
Hello everyone, just wanted to let all of you know that with everything going on and our move to Pennsylvania I have decided to change my e-mail service. To...
?????????????????Hit him in the head with a large pull bar and take all of the Chargers out of his possession! He obviously is in no mental condition to care...
I've got another bezel that was hacked for a radio, but the lenses are mint, and I was going to use the chrome paint on the outside of it. That stuff is...
Yep, there should be gaskets where you saw them. I used a thin layer of silly-cone between everything. If you don't like to use that stuff you can go to NAPA...
I found what I was lookin' for. Hopefully, it will help others as well. Check it out: http://www.moparaction.com/Tech/archive/disc-main.html I ended up...
Jack, redid a posi 489 for a friend last year because he's the type to not get his hands dirty. (NICE 70 challenger convertible) If I remember correctly...
Jeff, How many of these do you want??? I have 3 or 4 of them. Later Roger ... From: Jeff Brookings To: 66_67_dodge_chargers@yahoogroups.com Sent: Sunday,...
CAUTION !!!!!!!!!! There is an inner and outer seal on our wheel rear wheel bearings. If you do not pack the rear wheel bearings like you do the front wheel...
WOAH! thanks Ed. I guess I'm not helping any with BAD info! Maybe the NY cold weather has frost bitten my brain! I dont have any of my manuals with me and I...
Be sure to pre lube the bearings and races before assembling. Warren ... From: Topher [mailto:topher3@...] Sent: Sunday, February 01, 2004 2:20 PM To:...
Yep, and thats a lot of money for something that seems like it could cause more problems than it solves. Daniel Daigneault <danieldaigneault@...> wrote:...
I'm smelling spring in the air. 1) Are there any drawbacks to the "green" adjusterless rear bearings / seals? I am probably not doing rear disk, but I need new...
There's a very interesting article in the latest (April) Mopar Action on changing over the single cylinder brake system to the dual system. Looks a lot simpler...
This probably isn't new to the group, but here's the company's link I referred to before. I had to look for where I had it stored on my pc. Keisler automotive....
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
