I've done the search, I've been to the web sites recommended, I've called customer service for most hitch companies and have Email inqueries to the rest, but...
There's not one available yet for 64-66...I've searched but...for 67-72 there is along with the license plate braket that springs down. Remember on 67-72 chevy...
That is correct. The only difference between the 63-66 frames and the later 67 to 72 frames is the steering box mounting area, and the curve of the front...
there were some croosmember changes in the middle section also. esp in the 4 x 4's didn't the str box mounting change in 68 or 69? ron sidney, b.c. ... ...
Sid, You're right about the 4X4's, I should have clarified my statement, as I've only had experience with the 2wd frames. The 67's and up began using a...
Me and my 15 year old son have been restoreing a 1960 chevy for about a year now. Need to finish the paint, and install the drive shaft,( we have to make it...
Don, great project! We pulled grandpa's truck (63) out of the field and me and my son who was 12 at the time started working on it in the barn. The goal was to...
I forgot two things - If I was starting over again I would re-wire the whole truck front to back - it would have saved me a lot of time piecemealing it. And...
TA, What is 'Shiner'? _____ From: 6066_Chevy_Truck@yahoogroups.com [mailto:6066_Chevy_Truck@yahoogroups.com] On Behalf Of Allen Brehm Sent: Thursday, June 25,...
Best beer in Texas - you may have seen Shiner Bock. From: 6066_Chevy_Truck@yahoogroups.com [mailto:6066_Chevy_Truck@yahoogroups.com] On Behalf Of Paul...
Drive Shaft King in Dallas off of I-30 across from the Main Post office can build a driveshaft from scratch if you need them to. OR my friend might have one...
Shiner Bock is a locasl beer brew in Texas, about 2 taste buds better than Natural light and Budweiser I am a Miller man myself-MGD. But free COLD beer is...
what they've done is removed the cab from a long bed frame and installed it on a short bed frame. Steve ________________________________ From: sid works...
Did you go with a 63-66 or 60-62 frame? You could have gotten away from the torsion bars if you used a 63-66 frame. I would highly recommend having the...
that still has nothing to do with the driveshaft. it is just the cab that has been changed. and if he is going to install the l/bed box on there . it is...
I have a nice 61 3/4 ton long frame and running gear.Front end and Clutch went out so parked the truck years ago.Got good used front end from junkyard. I...
A factory short bed is like 1 1/2 feet or so shorter in the front and like 6 inches shorter in the back (2 feet total) than a long bed. A standard long bed...
Still doesn't answer why they need to shorten the driveline. The original post states: "We took a 1/2 ton frame and put the body from a 3/4 ton on it. Thats ...
Short bed and long bed have different frames. But no where in the original post does it mention anything beyond changing the body. Nothing in changing the...
I understand all that. But a novice ould fail to mention that. I deal with gys who really do not know wwhat they have,what they REALLY want, or even how to...
I understand all that. But a novice ould fail to mention that. I deal with gys who really do not know wwhat they have,what they REALLY want, or even how to...
... Should have almost evened out then! Shorten the shaft for the short base, lengthen for 3 to 4 (depending on which 3 and 4 you have). -- - David R Leifheit...
OK Don Johnson, did you read in the headline 1960 Chevy step side SHORT BED in EVERY time you wrote. If you had a 3/4 ton truck, chances are it is a long...
Good night. Give me a beer (I live in Texas and any beer anyone gives me is the best), a cigar, a lawn chair, and tell me when the second round begins. Who's...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
