Hello, I have a Fleetside tailgate if anyone needs it. I had it media blasted about 1 year age and it has sat around collecting surface rust. I will not ship...
Hello, Does anyone have any decent driver/passenger doors close to the Oklahoma area (I'm actually in the north-central OK)? Both of mine have pretty extensive...
The linkage connecting my wipers has come loose, and I can't for the life of me get the wipers off to get in there to fix it. I was told to just pull back on...
I find that if I gently lift straight out/up holding the arm and lift the back side with my fingers I can normaly get the arm to come off without damage. If...
Mike, I have taken mine off 3 or 4 times and each time it is hard to get them to come off and after you get them off they go back on very easy and you can't ...
on your wipers ,lift up on the arm and try to work the wiper end "socket" back and forth and the wiper should come off the splined arm ! if no luck go to your...
I forgot to mention the tab. That tab actually locks the wiper down on the shaft when the blade is against the windshield. Pulling up on the arm will release...
First, you might try tapping them gently with a rubber hammer. You don't want to dent anything. Tap it downward, then from one side, then the opposite side...
Thanks for all the help. I was right about there not being any release that was activated by pulling the blade back. These just press on. Boyd's advice to...
I have a 65 4X4 shortbed I got it from Oregon Did chevy ever out positrac in the front and rear. I can not turn the steering wheel on dry pavement if its in...
With Special Order packages, they may have. Who knows? If it's a limited slip rear end you need to put the GM lube additive in the rear axle or it will jerk...
I Had in My 64 k10 , I 'm not sure if chevy ever put out limited slip front and rear , I just installed power steering from a 76 suburban ,a real improvement,...
Thank you gentlemen I did check the gear ratio they are the same I put the right limited slip gear lube in.... It did help some. I opened the covers and...
Hello group, I am getting ready to do the final assembly on my '62 short fleetside. Does anyone have a recomendation for a supplier of bed kits? Any help would...
Ditto on the power steering. I used to look like Popeye for years trying to steer mine. Late 80's box and an early-style pump made all the difference. ... ...
From your description it sounds like someone upgraded the rear to a locker. Normal posi won't make the rear act the way you describe but a locker will. Is the...
Hi my name is joe, im 16, I got a 1963 chevrolet truck, its a very big project vehicle. It had rust all over the floors, the engine was shot, which is now...
Hope that is not your bondo. ... From: 6066_Chevy_Truck@yahoogroups.com [mailto:6066_Chevy_Truck@yahoogroups.com] On Behalf Of chosen_one_2010 Sent: Friday,...
I am looking at buying a 64 C-60 Chevy grain truck. It has a small block V-8 with a 2 barrel carb. Has a 4 spd. with a 2 spd. rear axle. Looks to be original...
My book sez 292-six, 327 and the 348 were available in the C-60. The 283 were only in the C-50. Dennis [Non-text portions of this message have been removed]...
Has anyone out there tried adapting the later pulse wiper module to a 64-66 wiper motor? Mike in AZ [Non-text portions of this message have been removed]...
I don't think 327 were avail for them but I am guessing the 292 or 348 would be a possibility......Ed. [Non-text portions of this message have been removed]...
According to the 1964 Sales Brochure, only in the C-60 and bigger trucks. This may have changed after they were printed... Dennis [Non-text portions of this...
I put an aftemarket kit in my '70 a while back and it worked fine. Don't know if there's much difference between a 66 and a 70. Tinker ... From: MIKE GARDNER ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
