I really like the roll cage in this ambulance (my van has a similar high top). Any guesses as to what size/thickness those bars might be, or recommendations to...
If it was used only as a Rescue Rig at the Beach I doubt the odometer was turned over. I think those units never left the beach area. They would just ferry...
i'm not there, but i'm pretty sure that the mileage is accurate. most departments located in smaller communities don't put a lot of miles on the specialized...
that van has been on ebay for several months. not original miles unless a fat guy sat in front seat full time. too much but would make a nice rv rig. ... ...
I agree w/ James C Boyd. since it is located at a tourist town, the mileage is probably correct. it is a special purpose fire/rescue vehicle (most likely...
1986 FORD E-150 4X4 WINDOW VAN POSTED 11-12-08: This van is located in Reno, NV 89509. This van is in need of a new home. It has factory P/S, P/B, A/C , C/C,...
The one thing to consider about emergency vehicles, is the “idling time” I live in a resort area on the ocean and in the summer allot of these vehicles sit...
Yes, the idle time can put these in the 400K range even thought the odometer reads 100K. I have an ex RCMP surveillance van 85 E350, with 132K on it, but it...
Hi Guys Is there any one that no's of a after market coil spring mount that can be welded on a front axle or has some one made one well two ha ha and took...
What axle are you using? I did a front coil spring conversion of a Dana 44 into a 1980 Ford E 150. Can take some pics if you like. Rory in Vancouver ... From:...
of course, diesel rigs are different than gas rigs. i would doubt that the ambulance spent more than 3-4 hours daily idling during the summer. i think most...
Here is a picture of the Dana 44 solid front axle in a Ford van. The bottom coil spring perch is bolted to the axle radius arm boss and a large bolt is welded...
Here is a picture of the radius arm bracket. Rory ... From: 4x4van@yahoogroups.com [mailto:4x4van@yahoogroups.com]On Behalf Of scottezgo Sent: Wednesday,...
.Dana 20, gear drive two speed Rory ... From: 4x4van@yahoogroups.com [mailto:4x4van@yahoogroups.com]On Behalf Of Robert Mann Sent: Thursday, November 13, 2008...
My radius arms are stock Ford F150, I assume Pathfinder uses a custom arm and bracket to keep them under the frame. I have had no issues with mine. Rory ... ...
Do I see a single track (panhard) bar? I would love to see a pic of the other (passenger) side. I have a Pathfinder with those double track bars that I want to...
Here is a picture of the panhard bar, passenger side. It is bolted to a large boss on the axle tube. Hope this helps. Rory ... From: 4x4van@yahoogroups.com...
Thanks so much. Thats exactly what I wanted to see. I think there have been others in the group that were interested in seeing that too. That panhard bar looks...
If you're changing to coils because you are looking for a better ride, forget it. A solid axle rides the same, leaf or coils. It's not worth the time and $$$$....
Hey guys, Phase #1 is done! I just finished my single track bar conversion on my '85 E350 Diesel. I originally used the Pathfinder set-up, which I didn't like....
Hi Jim Vic and all, I am mike and I was the one inquiring about the Bracket for the 7.3L in a E-350. The short story, I built a bracket Like the one I found on...
... very low? (it is not an unplugged connector) you are out of fuel. ROTFLMAO! That is just priceless! Great writeup, and thanks for the great info. What...
Hi Joseph, Funny thing about the starter, is that the new motor spins over way, way faster. (same starter) The sucky part was the two wires on it and if you...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
