Guys , I'm thinking about installing a snow plow on my 86 1 ton 4x4 van 460 Dana 60 front Dana 70 rear I live in the sierra nevada mountains the roads don't...
I am doing this right now in eastern PA. I am giving up an old Dodge Dakota plow truck and am setting up a Kubota tractor and my '95 E150 Quigley for snow...
I forgot to mention the Snowsport plow. It is strictly mechanical, and I didn't think it would work for my driveway. For a straight plow on pavement, it could...
Hey, thanks so much for your reply think it's gunna be something unique Kim donn18013 <donn@...> wrote: I am doing this right now in eastern PA. I am...
Hey guys, I have 86 Ford E-350 Quadravan. I'm out today running around with my heater on, it's about 25 degrees out, and I park it and push the e-brake on and...
Hi Frenchy, The blower fan switches don't seem to last very long in those ford vans. Its not hard to get at that switch. Just unplug the connector and use a...
I had the same problem on my 80 E-150 when I discovered that the ignition switch was not in the correct position after the engine started. The engine ran but I...
Get aload of this. I go out 2 hours later to run another errand and hey the blower works. I'm out about a hour and it never quit working. Sooo I guess I'll...
Frenchy, I have a 86 1 ton ford 4x4 had the same problem! It was the resister that connected to the hearter it self. Has two little screws replace it worked...
I just bought a (very) used sliding door for my '76 Pathfinder to replace my own rusted out slider. The one I bought is pretty much worse in every way than my...
... Not sure what type of window you mean. Do you have any pics of it? If it is a different type of aftermarket conversion window, it might be missing the...
Doesn't matter what kind of window it is or door for that matter, If the window is attached to the outer body shell only then you have gotten a door that...
This was not just a Ford van problem but a FORD problem they all do it. If it weren't for having the van and going thru these kind of problems I would have...
I finally got outside to check, and my '03 Ram 2500 doesn't have the front axle disconnect (CAD). The Wrangler lost it in '97 when the TJ came out. I recently...
http://sledskiing.blogspot.com/ I added Pro comp wheels Kenwood full range speaker boxes IPOD hookup bed platform As soon as I get a warm day i will install...
A circ fan inside will move the air around to prevent stratification. You should look into a propane heater for an RV as they put out plenty of heat and...
The last time I was into lowes I saw a wayfer type material that you put down on the cement floor of your basement before installing carpeting. Didn't stop to...
Hi folks, Just back from vacation Frenchy, Also check to see that the E cable/pedal box isn't touching any wiring connections anywhere. I worked on a car once...
Hi all, Below is a link to a company in Texas, that makes excellent insulation that can be used for many different applications. i.e. First: is for insulating...
Anyone need a really big gas tank. We stripped down a 1993 Ford E350 Class "C" motorhome at work and the tank won't for the design we have in mind. I don't...
I'm just outside of Baltimore in Maryland and I'm not even sure if it can be shipped. We just took it out last Thursday so it still has fumes in it. Dave -- ...
On a related note, do these larger tanks from a cutaway e350 fit a extended body e350? Are they a direct replacement, or does the body get in the way. Thanks,...
I installed one of these tanks on my quigley this past summer and it was a job. It was certainly not a bolt in as the tank on my 89 is mounted to the body and...
Marty, Many thanks for the info on this. Glad I haven't gotten one yet thinking I could just bolt it in. Where does the extra space come from? I have a EB...
Gosh, You know I uninstalled it and it wasn't anymore than 2 bolts thru the straps on 1 side and 2 bolts thru the straps and brackets on the other. OOPS sorry...
It definitely is lower and much tighter than the stock. I had to drop my class 5 hitch 2 inches to clear the tank and I rely on the hitch to hit the ground...
OK guys, Here's one for you. Having finally finished my coversion, I've been trying to set up the geometry. I have a couple of questions I hope someone can...
I don't think I would use the original van specs because the tires move very differently in an independant suspension than when dealing with the solid axle. I...
I would set the camber to the truck specs that the axle came out of. I have shop manuals for 77-79 years if that is the age of the axle you are using, so lemme...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
