Just getting I can't seem to get the one hand brake to work, the cables are new, the calipers are reconditioned, in which i have already swapped this one...
Ok...just to reprise this a little with the thread that came out a few months back, because I need to be clear... The F-Con is intercepting ALL fueling signals...
NO The FCON is only effective above the stock boost limit of the car. It does NOT modify anything that is in the stock ECU. -- Matt Arlington, WA USA "Being...
That's interesting. Someone just told me this weekend how chips were better than piggybacks because with piggybacks the signal had to go from ECU to FCON (to...
I was looking around on fleabay and I found this: I'm looking to go with a larger, front mount intercooler on my car, but I don't want to get rid of my AC......
Mark, Sites like Autospeed seem to feel A/W-W/A systems work nearly as well with the circulation pump OFF as they do with the pump ON for most street...
Thanks very much, George... That is a very informative read. Here is the writeup I believe you mention: http://autospeed.com/cms/A_110772/article.html...
I searched the forum, and this is this topic I've replied to is the closest I could find to an answer to my question. It seems Jay is describing the existence...
More likely, you have a warped rotor or rotors. Did you have them turned? Poor centricity would be noticed at high speeds, not when braking. My same conversion...
Hi! I just picked up one of these cars for a very good price that I could not pass up. This is my first 323 GTX so I have a lot to learn about them. I called...
On a real 4WD dyno, if the car is stock, I'll guess 102 hp at the wheels Stock injectors are 310cc/min Stock timing is 12 degrees BTDC -- Matt Arlington, WA ...
The door harness may be damaged, but it is common for the window switches to become corroded to the point where they don't work. Check for voltage at the...
Chris, welcome aboard. I was just going to mention Jay's recommendation of Torco as well. I'm running Redline Shockproof in the diffs and transfer carrier and...
Matt, What is the Stock threshold of the car. From: 323gtx@yahoogroups.com [mailto:323gtx@yahoogroups.com] On Behalf Of Matt M Sent: Monday, June 01, 2009 3:59...
John C Crick
john.c.crick@...
Jun 3, 2009 7:37 pm
67733
... It could be a bent wheel, but if they're the same ones you had on the car before, and you didn't notice this issue, then maybe one of your lugs ain't quite...
I am moving to California and my 1988 GTX will not pass smog. So unfortuately i need to sell it. The engine was rebuilt 20,000 miles ago. It has koni...
I'm in California... All smogging needs is a little... creativity. =D /Craig On Wed, Jun 3, 2009 at 2:24 PM, thomasaharleman ... -- /Craig Hansen [Non-text...
I never experienced those issues after the Gallant brake upgrade. If you started with all new rotors and pads, I am amazed you have this problem. Usually an...
Hi Mr. thebaloonist, What does it mean, are you also a hot air baloons enthusiast? I would be psyched if you wanted to send an image along of the centering...
Thanks Greg, I will check these things, and also acquire new rotors & pads. I did not initially, because I remembered reading how folks had weird centering...
The upgrade to the Mitsu g rotors has never been a centering, hub centric issue. For the most part. I have had mine for ages and no issues replacing the rotors...
... You should be able to find the info at the database. Also, there is (was) a website that highlighted a "how to" for the brake MC and booster swap, as well...
I don't see how the centering rings would work because the rotors push the wheel out beyond the centering shoulder on the hub. I have not used centering rings...
Joel, I ran 18+ psi with the hybrid VJ14/11 all the time at the track. EGT's were just fine. But right up there at 1550 degrees where its happy. The B6T likes...
While working to source a set of stock injectors, I called the local Mazda dealer this morning to see what they were charging. Better sit down, because their...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
