My GTX was a BPT swapped, 16 psi, Open class rallycar with a stock radiator and stock fan, with a Saab 9000 intercooler that was bigger than the radiator. It...
In my car : 1988 gtx with gtr engine. I had over heating problems with front mount intercooler bolcking 90% of the rad.The intercooler removed the car had no...
In my car : 1988 gtx with gtr engine. I had over heating problems with front mount intercooler bolcking 90% of the rad.The intercooler removed the car had no...
True enough. The current rallycar is getting a much more serious piece of kit, 30'x16"x3". But the radiatior is getting a pair of Flexalites, and the oilcooler...
Hi. Its one of those long stories... I had a friend re-build it the first time. There was a few problems.... Number 1 piston was hitting the head. It was not...
Cha Ching ..Busted ring land,MY 2 pennies.NicKZ ... From: Greg Meredith To: Michel Morency Cc: 323gtx@yahoogroups.com Sent: Friday, February 01, 2008 6:35 PM ...
Number 4 piston has oil on it. Still have to take the piston out. probably tomorrow. Here is a pic for all to see. http://tinyurl.com/2c2wo3 Regards, Greg. ......
When I pulled the transmission to replace the clutch, I tried to give myself more room under the hood by pulling the radiator. It pretty much fell apart in my...
HI I am looking for a 1990-1993(Miata) 1.6L DOHC engine head for my 1992 Mercury CApri XR2? ( in seattle area) I think this head is the same as a Miata? I am...
OK everyone, here is the deal: Today I decided to open the main relay after being recommended to check the voltage it by Bob Martin. One of the wires inside...
Is the air flow meter connected??? Do you have a kill switch hidden somewhere??? Have you checked the fuses AGAIN. That wire might have blown a fuse. I will...
Hmm, I think I'll stick with my electrical gremlins thanks ;) So yes, the VAF is connected, and no I haven't checked the fuses, but what do you think could...
Re check the spark plug leads. Make sure that they are in the right holes. Looking at the distributor from the front of the car, the leads go... 2 >>>> is the...
Hi all Number 4 piston is broken. Here is a pic for all to see. http://tinyurl.com/2c2wo3 Any ideas why I keep breaking pistons??? pre-detonation???? if so how...
So I think I'm a moron. I was thinking on my 100 mile car ride home from my parents house (where the GTX is being built) about what might cause me to have...
I guess that should read in response to Greg's post, thought it had just come to my e-mail :) ... resoldered it ... cylinders ... do... ... cranks. I ... ...
Greg, Need a picture of the piston out of the hole and cleaned up. What broke? Hole in top of piston? Piston between top and first ring? Skirt below pin? Shirt...
I installed them in Euro spec H4 headlights that were sold a long time ago by George Davies. The HID's fit into the headlight housing just like a H4 bulb...
The HID kit is for a H4 headlight system (European) and had the H4 connector on the harness to plug into an existing H4 harness. But as you know, the GTX does...
Ah I see, it actually had the H4 connector built in to the kit. Most plug-and-play kits only use spade connectors to connect to the stock harness. Lets see how...
Yes it did. I was kind of long winded with my reply. I played with them some last night, showed my wife and she said huh??? The light is really white. I have a...
This is the sun visor, not the sunroof, right? Jim azgtx <azgtx@...> wrote: I fiddled with the sunshade from an 89 MX-6 and fit it to the EGT assembly....
After you make sure your timing belt is properly timed, give the distributor more advance by turning it clockwise in the head give one more try at starting it....
here you go.. [IMG]http://i109.photobucket.com/albums/n73/NERDHERD5/S7302776.jpg[/IMG] IMG]http://i109.photobucket.com/albums/n73/NERDHERD5/S7302775.jpg[/IMG] ...