If that is the case.....you'd better hope that it is the one in the front that you can get to fairly easily. The one on the engine side of the turbo was...
I'd say it's coming from the Coolant Bypass Pipe, but that's under the DV pipe. Unless it's shooting out from the Therm housing... /I got nothing. Terry...
Does anyone have (good) rear stock shocks for sale? Also, looking for suspension techniques or similar springs which lower the car and use original perches not...
I hope this doesn't post twice. I am wanting to buy stock shocks in good shape with perches (need rears especially). Also, need lowering springs like...
I have this strange howling coming from the rear of the GTX when it is under load. accelerate and it increases back off and it goes away. Before I tear it...
Well this afternoon I went to crank open my sunroof on my 88 GTX and the handle decided to remove itself fron the rest of the crank . Darn AZ heat...Anyway...
The good thing about coilovers is that if you don't like the rates, you can change them easily. Get yourself a set of GR-2's (try shox.com), go down to...
In regards to mufflers, car #1 has a 2 1/4" no-cat exhaust into a Dynomax muffler. It is a bit too loud on the highway, but OK around town. Car #3 has a 2 1/2"...
Martin, Robert M.
Robert.Martin@...
Apr 2, 2004 1:34 pm
47950
hey mike havent heard from you on that hood i really need one get back asap please thanks josh...
anyone have part #s for some NGK plugs, wires, cheaper-than-mazda- but-still-decent distributor cap, oil filter, power steering belt? i figure since every one...
someone have a link to a hood sticker pic? i seem to have misplaced mine... any other diagram or manual page showing the correct routing of the lines would...
Just wanted to pass along this bit of info. A while back Rob Weeks offered to go through his local machine shop (Button Automotive Machine) for anyone needing...
Hello All, Well after parking the gtx for some time it’s back on the road with a few new tricks. I received a jerry rigged HKS system (the cat had been cut...
Hello All, Looking for a couple of items, hoping someone can assist. I'm in need of a distributor for an 88 GTX, as well as a complete engine harness. Anyone?...
Mark, I HAD forgotten about the rods.. LOL Glad to help, very glad it worked out well. Rob '88 Tracer B6T Projekt Mark Meller <markmeller1@...> wrote: ...
Hey all; Well, let me say first that when it comes to fixing anything turbo related, I'm a newbie. I've owned/driven/looked at other cars with turbo's, mainly...
Howdy Fans So who on the list knows the inner workings of the diff lock motor assembly? I opened mine up and all the springs flew all around the room (just ...
Well, for starters you'll probably want to talk to Reich Racing about their ECU upgrade before even considering disconnecting the overboost system. It's there...
For the plugs, I found NGK platinum Rs worked best. I'm not sure of the part numbers- they came as a free gift with my Reich ECU upgrade and are still going...
i need the GTX work shop manual because i need the wiring diagram i have the workshop manual for the GTR is it the same one i really need the WSM or the wiring...
today as i was pulling my newly assembled 88 GTX out of the shop and cranking the wheel hard left, i hear a POP! never a good thing, right? anyway- i have...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
