Try: www.cafepress.com/Polyv8 ________________________________ From: 318poly@yahoogroups.com [mailto:318poly@yahoogroups.com] On Behalf Of Gary Pavlovich ...
Andy, Thank you for the Poly t-shirt info. I just ordered a couple t-shirts (in X-LG of course!). Gary ... From: Andy Burgard To: 318poly@yahoogroups.com ...
I got a t-shirt and a sweat shirt. They're not cheap, but excellent quality. I'll be wearing mine at Mopars at the Strip at Las Vegas, March 24 - 26. ...
Iam changing my two barrel intake to a four barrel intake. Also from a two barrel carter carb to a four barrel edelbrock carb. I have dicoverd that the linkage...
I didn't have to much trouble with the throttle cable, just had to fab a new style clamp, from junk I had in the garage. doesn't look pretty but works. there's...
After thinking i had everthing ready to go back together, i put the crank bolt int the crank to bring it to TDC . I have done this many times when the motor...
That sounds nasty! I can't see that the bolt bottoming out would do that, though it would get tight. I think it's something like galling of the thread. The...
Hey Ron. Find a bolt,or something that will fit through your crank flange and turn the engine over until it binds. Then make sure your loosening the crank...
If you take a can of R134 refrigerant and shoot it on the head of the bolt it should shrink it, the opposite of heating the crank with a torch [I know you...
Hey Ron, Try shooting some R134 refridgerant onto the bolt. it's the opposite of heating the crank with a torch [I know you dont even want to do that] the bolt...
if you can get the breaker bar to rest somewhere safe, by using the starter motor to crack the bolt out is a sure fire way to easily loosen that bad boy! we...
Damm Ben where were you a hour ago when I tried everything and finally
decided off with its head!! I went out and bought a 1/4 ,, 3/8 and a 5/8
drill bit . I...
I have read a bunch about the poly's bellhousing and when the bolt pattern changed, i.e., 61-62? What I need to know is if the bellhousing bolt pattern for a...
im doing the exact same thing and although only a trial fit at this stage, im pleased to report that only one bolt hole between the block and bellhousing does...
I've not done that type of conversion but have swapped a early 70s 727 for the original 727 in my 65 poly equipped Coronet. Everything went together just...
From what I've found and seen and read, the change was with the '62 model year. The only exception to that is the Chrysler Royal here in Australia, which was...
Attention Boys & Girls, From Bill Richardson at Ram Racing Engines, as of noon today, the good news is that the heads should be completed and ready to install ...
that is a pity but as you say it is better to have no such product avaliable than an inferior one. a broken rocker could do plenty of other follow on damage. ...
Has anybody seen the 6 pak currently selling on ebay Item #8045721459 its price has gone up over a thousand dollars and there is still 5 days left. I have...
Bob, I have almost stopped buying from EBay. I see parts selling for over a hundred bucks that I have given away to fellow Mopar nuts in the last six months. I...
Considering it's complete with carbs and linkage, it MIGHT not be too bad of a price; however, I betcha it will go for considerably more than it's already at....
Anybody got a current cross reference part number for a vanilla 2 bbl air cleaner filter for my 64 poly? Mine's filthy. Just the original 2 bbl stromberg and...
