Hi Thomas, From 1973 to 1975, BMW installed a turbocharger in some of its mechanically-fuel injected, 2002 Tii cars. This factory option resulted in a 2150...
Hi, Send me the last 7 numbers of your car's VIN. Maybe your car's differential is not original equipment, but I can at least tell you which differentials...
Thanks for the informative reply! I'm sure Afshin in Switzerland will find it of some help. Afshin, there were also Aftermarket Turbo Kits made for the old...
I *think* you should be able to use the oil cooler from an E30 325is. It's thread compatible, but I don't know about other fitment issues. I'm going to give...
Hi guys, Thanks alot for your feed backs :-) I was actually aware that's going to be for most a custom-made job .... but thought maybe I could take some...
Hi Guys I have an '89 318i which I've been building up over the past 6 months to run in my local BMW club Supersprint series. I've done the following on top...
You can get the oil cooler adapter for M10 from Korman last time i asked was $35 or so. ... ===== Ernesto Vargas-Azofeifa Webmaster & Network Administrator ...
If you can try a hotter spark, say nology wires and an MSD box, that might give you some more kick, also try and camber it up, even more handeling. Blake ... ...
Hi Robert -- An LSD is a big advantage for a race car. I'd strongly suggest looking at something like that. It really helps get the power down. If the car...
M42 is a different beast all together. completely different head design thus different manifold. you may be able to do something with the M42 as it is similar...
I didn't know that. Freaking awesome. So the 1.9L M44 head is the same, therefore, would those headers and everything else work on my head to? Thanks for that...
I've got a complete M42 drive train (radiator to differential, both subframes, brakes, harnesses) for sale. Real low miles, real cheap. In case anyone want to...
How many miles on the engine? Blake ... ===== My Masaratti does 185, and I lost my license, now I don't drive...... - from " Life's been good to me" - Joe...
The car was a 1995 318i that died in a roll-over. It had under 40K on it at the time. The insurance company totaled the car, a friend of mine who has a...
In a message dated 2/2/04 2:35:00 PM Eastern Standard Time, jsage@... ... Sage, He's running an m42 motor, different config than yours. :) Cheers, Jim...
Sage, If you have an M10 318i, I used a BavAuto Preload adjustable strut tower brace and it cleared my Distributor and wires, not by much but it worked for my...
Nope, I'm still using the stock one. How much clearance is there around the distributor? Does the bar pass in front of the distributor? By how much?...
It passes over the top toward the front of the distributor with apprx 1/4" to 1/2" clearence. It still leaves a little room to play with wires but hard to get...
If the engine were to shift forward under really hard braking / mild collision, is there a chance that the strut brace could contact the distributor?...
Sage, I think that if the engine were to shift forward under really hard braking or a mild colission you have bigger worries than the strut brace touching the...
Hey All -- Hard at work getting ready for the race season coming up this year. With help from lots of people, the "Fugly Gold Car" is now a less fugly, and ...
OK, I am looking for right rear triling arm assebly, with everything: trailing arm, brake assmbly, hub, half-shaft. also looking for a rear subframe. anyone? ...
Hi Mel, I still have all my old parts from when I converted to rear disc last year. The only thing(s) I can't help you with are the half shafts and subframe. ...
Thomas thanks. Looks like I might go to a rear disc conversion too. Since it appears that I bent my rear sub-frame I might just buy everything. I am not 100%...
I got the stuff from a local wrecker... so the 2 trailing arms came with everything that I needed. It was as simple as unbolting and re-bolting. Just had to...
In a message dated 2/15/04 1:51:55 AM Eastern Standard Time, ... Sage, Looks great, though personally I would have gone with Hennarot <BFG> Cheers, Jim 84 318i...
Thanks guys! Hennarot is a very nice color as well, but I've always really liked Inka. Plus, that's how the painted the jagermeister cars. Once all the goods...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
