has seized. Lots of road water/salts/muck all over it no doubt. Trouble is, ho do you get to the bearings? I got the pedal off but there seems to be a pin...
Greg You do not remove the pin you just use a thin bladed screwdriver to remove the crud and then spray with wd40 and leave until free. Spray once a week in...
Greg are you talking about a px pedal? Mick L ... From: "gregnashuk" <gregnashuk@...> To: <2StrokeSmoke@yahoogroups.com> Sent: Wednesday, April 01, 2009...
Greg are we talking a P or PX pedal? Mick L ... From: "gregnashuk" <gregnashuk@...> To: <2StrokeSmoke@yahoogroups.com> Sent: Wednesday, April 01, 2009...
Hi Mike PX. In the end I just bought a new one. I have left it soaking in WD40, moving it around every now and then, it would move but still very stiff. New...
Hi Barry Between the pedal and the braket is a very tight gap, might get a thin knife blade in there. I soaked it over a day and night with WD but to no...
1. Use either a rubber mallet OR a hammer and a drift OR a hammer with a punch in the notch on the back of the stud NOT a rubber mallet and a drift. A drift...
Hello The hub should just pull off, have the bearings collapsed and have you pulled the brake free of the drum, if it is a drum brake ir nmay be caught on a...
Greg, What I did to my old sold now green PX was to get under it and wash some crud off the pedal. The pedal pivots on a pin. One end is by a nut, which need...
Greg, My partner has a Honda sh50. Its ignition box has a switch , one way normal other more revs & power. It only does 34 but it accelerates better. Mick L ...
wow, thanks, Mick if only things were always that simple! I've read of tiny exhaust headers, tiny carburettors but also huge transfer ports so while I don't...
Hello scooter friends, I don't normally spam any of my scooter groups with politics but this is too important for anyone to ignore. This particular bill (HR...
Sounds like more nut case liberal nonsense, take away your rights to somehow save the world. Reminds me of a woman I used to work with that was a nut case...
Yeah, uh. what does this have to do with scoots? Being and idiot liberal, I prefer to keep my politics off the groups, and respect other's opinions. Perhaps...
Loose screws are common to both. To: 2StrokeSmoke@yahoogroups.com From: dan@... Date: Wed, 15 Apr 2009 06:45:11 -0500 Subject: Re: TSS: Re: OT HR 669...
Don Cameron
buddiedude@...
Apr 15, 2009 5:24 pm
30761
Nutcase lib as well here who actually read the bill. Big brother didn't come to mind when I read it. ... From: Danilo <dan@...> Sent: Wednesday,...
Hmmm, We have a right to capture animals and own them, and cage them, and slaughter them, and make them entertain us, and wear them, and cut them apart, and...
... Well, I just received the new bearings from Scooterworks. Looks like they are too big for my drum. Seem to vaguely remember that the axle size was one of...
If you tell them "P200E" or 1978-1982 they should know "16mm". If you tell them PX200E or PX200 or 1983-present they should know 20mm. Enjoy, John M. Stafford...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
